Zone Réno
Contemporary house with black cladding and cedar in a residential neighbourhood, bare birch trees, overcast dusk sky
Regulations

RBQ fines: what an unlicensed contractor costs

By AlexNovember 15, 20265 min read
Back to articles

Working without an RBQ licence is not a minor slip. Quebec's Building Act sets fines in the tens of thousands of dollars, and they also reach a contractor who hires an unlicensed subcontractor.

Here is what the law says, section by section, with the 2026 amounts.

Who the fine applies to

Section 46 of the Building Act sets two rules:

  • Working without a licence. No one may act as a construction contractor, take the title, or give reason to believe they are one, unless they hold a licence in force.
  • Hiring an unlicensed contractor. No contractor may use, for construction work, the services of another contractor who does not hold a licence. A general contractor who hands work to an unlicensed subcontractor is therefore covered too.

Section 48 applies the same principle to the owner-builder, who builds for their own account and must hold their own licence.

The amounts in 2026

Section 197.1 sets the fine. It depends on the situation and on who is punished:

SituationIndividualCompany
No licence, or using the services of someone with no licence$14,098 to $105,734$42,292 to $211,465
Licence without the right category or subcategory, or using the services of someone in that situation$7,051 to $35,244$21,148 to $105,734

For a first repeat offence, the minimum and maximum amounts are doubled. For any further repeat offence, they are tripled.

These amounts are not fixed. Section 196.3 indexes them every year to the consumer price index, and the RBQ publishes the current table on its fines page, in French. The table above shows the 2026 amounts.

Rolled blueprints, a closed notebook, a pen and two cups of coffee on a pale oak desk

An active licence is not enough

The second row of the table often goes unnoticed. A contractor can hold a valid licence and still be in breach, because it lacks the category or subcategory that matches the work. Our article on how to verify a contractor's RBQ licence covers the subcategory traps, and the questionnaire to find the right RBQ licence helps a contractor work out which one they need.

What the law gives the client

If you are not a contractor yourself and you signed a contract with a contractor who does not hold the right licence, section 50 lets you ask for the contract to be annulled. The owner of a property burdened by a legal hypothec registered by a contractor without the right licence can also ask for that hypothec to be removed.

There is one important condition: the request is refused if it is established that you knew the contractor did not hold the right licence.

An individual who builds or has built their own single-family home for personal use does not need an owner-builder licence (section 49). They still may not carry out gas, petroleum equipment or electrical work themselves unless they are a contractor.

Administrative penalties since Bill 76

Bill 76, assented to on November 27, 2024, added a regime of administrative monetary penalties. The RBQ can impose them itself on anyone who fails to comply with the Act or its regulations, in the cases provided for, without going through a prosecution before a court. It published the general framework for applying them on March 9, 2026. The amounts depend on the breach in question: that framework is what to check for a specific case.

How a general contractor protects themselves

It comes down to three steps, before handing over the work:

  • Check the licence number, its status and its subcategories in the RBQ licence checker.
  • Compare the subcategories with the planned work.
  • Keep a dated record of the check, and repeat it during the job, because a licence can expire or change status.

Zone Réno's subcontractor compliance tracking rereads each licence every morning and keeps a dated report per job site. It gathers information; it does not rule on compliance. For a borderline case, the official RBQ registry prevails. And the licence is only one of the checks: a subcontractor's CNESST premium can also be claimed from you.

Frequently Asked Questions

Can a homeowner be fined for hiring an unlicensed contractor?

Section 46 prohibits a contractor from using the services of another contractor without a licence. An individual who hires a contractor for their own work is not named in it. The law instead gives them a remedy, annulment of the contract (section 50), as long as they did not know. For a specific case, the RBQ or a lawyer can confirm.

Is the fine the same for an individual and a company?

No. For a company with no licence, it ranges from $42,292 to $211,465. For an individual, from $14,098 to $105,734. The amounts are lower when the licence exists but lacks the right category or subcategory.

Do the amounts change from year to year?

Yes. They are indexed every January 1 to the consumer price index. Check the RBQ fines page for the current year's amounts.

What happens for a repeat offence?

The minimum and maximum amounts are doubled for a first repeat offence, and tripled for each further one.

Does an expired licence count as a licence in force?

Section 46 requires a licence "in force". An expired licence is not. For a suspended or restricted licence, check its status in the registry before hiring the contractor.

Post your project

Describe your work once, and contractors in your area who do this kind of work can get back to you. It's free, with no commitment.

Post a project

Partager