Zone Réno
Safety glasses, leather work gloves, a measuring tape and a blank card laid flat on grey concrete
Regulations

CCQ competency certificate: what employers must check

By AlexNovember 15, 20265 min read
Back to articles

On job sites, everyone says "competency card". The CCQ and the law speak of a competency certificate, and more broadly of a right to work. The difference matters, because the employer must make sure every worker has one, and the employer is the one who pays when they do not.

The right to work: four documents

On its page for employers, in French, the CCQ lists four ways to have the right to work on a construction site:

  • The competency certificate, in three forms: apprentice, journeyman or occupation. The apprentice certificate confirms that its holder is in the course of an apprenticeship in a trade, and comes with an apprenticeship logbook.
  • The exemption from holding a competency certificate, often limited to a region, an employer, a task or a period.
  • The confirmation number, valid for up to 14 working days after the reservation that produced it.
  • The temporary right to work, which allows work in the trade or occupation concerned, on the conditions set when it is issued, while the worker waits for a certificate or an exemption.

Who has to check

The CCQ is clear: it is up to the employer to verify the validity of each worker's right to work. The worker must hold a certificate in good standing and have it on them when working on a site. They may only work in the trade shown on their certificate.

A clear blank badge holder with a black lanyard on an oak table

What the law penalizes

The Act respecting labour relations, vocational training and workforce management in the construction industry, known as the R-20 Act, targets the employer in section 119.1. Anyone commits an offence who uses the services of an employee, or assigns them to construction work, when that employee does not hold a competency certificate, does not benefit from an exemption, or does not have the certificate or proof of exemption in their possession.

The fines, according to the text of the Act:

OffenceIndividualCompany
Using an employee or assigning them to construction work without a right to work$1,000 to $5,000$3,000 to $30,000
Assigning them to a trade without the matching certificate$500 to $1,500$1,500 to $9,000
Using an employee while their certificate is suspended$2,500 to $12,500$7,500 to $37,500

The last row comes from section 119.4, where the second amount applies to any person other than an individual. A worker who uses another person's certificate or falsifies a certificate also commits an offence. Check the current version of the Act on LégisQuébec before relying on these amounts.

Checking in practice

Here is a simple way to check:

  • Ask for the certificate, the exemption or the temporary right to work before the first day of work.
  • Compare the trade or occupation shown with the tasks assigned.
  • Note the expiry date, and check again as it approaches.
  • Keep a dated copy in the job file.
  • If you doubt a document, contact the CCQ.

And when it is a subcontractor?

A subcontractor's workers are its employees: it is the employer targeted by section 119.1. Asking for their certificates before work starts is still good practice. You know where you stand, and you have a dated record.

Zone Réno's subcontractor compliance tracking keeps, for each worker, the expiry date your subcontractor enters, and sends you a reminder before it arrives. It gathers information; it does not confirm a certificate's validity with the CCQ.

For the other checks, see the RBQ fines for an unlicensed contractor and a subcontractor's CNESST premium.

Frequently Asked Questions

Competency card or competency certificate?

The word used by the law and the CCQ is "competency certificate" (certificat de compétence). "Carte de compétence" is the everyday expression on job sites. The certificate comes in three forms: apprentice, journeyman and occupation.

What is a right to work?

It is what allows a person to work on a construction site: a competency certificate, an exemption, a confirmation number or a temporary right to work.

How much is the fine for a worker without a certificate?

For a company that uses the services of an employee without a right to work, from $3,000 to $30,000. For an individual, from $1,000 to $5,000. The amounts are lower if the employee has a certificate, but not for the right trade.

Can an apprentice work on a construction site?

Yes, if they hold an apprentice competency certificate, which confirms they are in the course of an apprenticeship in a trade. They also have an apprenticeship logbook.

Does the worker have to carry their certificate?

Yes. The CCQ states that they must hold a certificate in good standing and have it in their possession when working on a site.

Post your project

Describe your work once, and contractors in your area who do this kind of work can get back to you. It's free, with no commitment.

Post a project

Partager